Kia Cee'd: General Information / Special service tools

Special Service Tools
 
Tool (Number and name)
Illustration
Use
Alternator pulley remover wrench
(09373-27000)

Removal and installation of alternator pulley
Micro-570
Battery checker

Check the battery condition
Check the charging and starting system
MDX-670P
Battery checker

Check the battery condition
Check the charging and starting system

Troubleshooting
Troubleshooting Ignition System   Symptom Suspect Area Remedy Engine will not start or is hard to start (Cran ...

Ignition System
...

Other information:

Kia Cee'd JD Service Manual: Accelerator Pedal Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). 3. Remove the installation bolt (B) and nut ...

Kia Cee'd JD Owners Manual: Starting the diesel engine
To start the diesel engine when the engine is cold, it has to be pre-heated before starting the engine and then have to be warmed up before starting to drive. 1.Make sure the parking brake is applied. 2.Manual Transaxle - Depress the clutch pedal fully and shift the transaxle into Neut ...

© 2017-2024 www.kceed.com