Kia Cee'd: Exhaust Emission Control System / Catalytic Converter Description and operation

The catalytic converter of the gasoline engine is a three way catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and separates oxygen from the oxides of nitrogen (NOx).

Description and operation

Description Exhaust emissions (CO, HC, NOx) are controlled by a combination of engine modifications and the addition of special control components. Modifications to the combust ...

CVVT (Continuously Variable Valve Timing) System Description and operation

Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is ...

Other information:

Kia Cee'd JD Service Manual: Purge Control Solenoid Valve (PCSV) Description and operation
Description Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fuel vapo ...

: Blind Spot Information System Requirements. Switching Blind Spot Information System On and Off
Blind Spot Information System Requirements Blind spot information system turns on when all the following occur: You start your vehicle. You shift into drive (D). The vehicle speed is greater than 6 mph (10 km/h). Switching Blind Spot Information System On and Off To switch blind spot informa ...