Kia Cee'd: Cruise Control System / Cruise Control Switch Repair procedures

Kia Cee'd JD Service Manual / Engine Electrical System / Cruise Control System / Cruise Control Switch Repair procedures

Removal
1.
Disconnect the battery (-) terminal.
2.
Remove the air-bag module from the steering wheel.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
3.
Remove the steering wheel.
(Refer to Steering System - "Steering Wheel")
4.
Remove the steering wheel cover (A) after loosening the screws.

5.
Disconnect the cruise control switch connector (A).

6.
Remove the cruise control switch (A) after unfastening the screws.

Installation
1.
Install in the reverse order of removal.
Inspection
Measuring Resistance
1.
Disconnect the cruise control switch connector from the control switch.

2.
Measure resistance between terminals on the control switch when each function switch is ON (switch is pressed).
 
Function switch
Terminal
Resistance (+5%)
CANCEL
2 - 7
180Ω
SET
2 - 7
330Ω
RESUME
2 - 7
550Ω
CRUISE
2 - 7
880Ω
S/LIMIT
2 - 7
1.44kΩ
Flex Steer
4 - 7
180Ω

3.
If not within specification, replace switch.
Cruise Control Switch Schematic diagrams
Circuit Diagram   1. Remote control switch (Audio) 2. Remote control switch (Cruise) 3. Blue tooth hands free switch 4. Trip switch ...

Emission Control System
...

Other information:

Kia Cee'd JD Service Manual: Repair procedures
Diagnosis With GDS 1. BSD system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis. 2. Connect the cable of GDS to the data link connector in driver si ...

Kia Cee'd JD Service Manual: Repair procedures
Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end ...

© 2017-2025 www.kceed.com