Kia Cee'd: Windshield Deicer / Description and operation

Windshield deicer system prevent windshield wiper from freezing in the winter season. It consists of deicer in the lower part of windshield, switch and relay. Body control module receives an input signal from the deicer switch, then controls relay. Operating condition is the same that of rear window defogger system.

Since the generator "L" is switched ON, if the deicer switch is ON, then deicer output is ON for 20 minutes.

Components and components location

Component Location   1. Rear defogger relay (Built-in smart junction box) 2. Windshield deicer switch (Rear defogger switch) 3. Windshield deicer 4. ...

Windshield Deicer Repair procedures

Inspection 1. Remove the cowl top cover. (Refer to the wiper) 2. Disconnect the windshield deicer connector (A) from the wiper motor ...

Other information:

Kia Cee'd JD Service Manual: Components and components location
Components Location   1. PCV valve 2. Canister 3. Purge control solenoid valve (PCSV) 4. Catalytic converter (WCC/UCC)   1. PCV valve 2. Canister ...

Kia Cee'd JD Service Manual: Rail Pressure Sensor (RPS) Description and operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM ...