Kia Cee'd: Warnings and indicators (Instrument cluster) / Engine oil pressure warning

This warning light indicates the engine oil pressure is low.

If the warning light illuminates while driving:

1. Drive safely to the side of the road and stop.

2. With the engine off, check the engine oil level. If the level is low, add oil as required.

If the warning light remains on after adding oil or if oil is not available, we recommend that you call an authorized Kia dealer.

CAUTION

If the engine does not stop immediately after the engine oil pressure warning light is illuminated, severe damage could result.

CAUTION

If the oil pressure warning light stays on while the engine is running, serious engine damage may result. The oil pressure warning light comes on whenever there is insufficient oil pressure. In normal operation, it should come on when the ignition switch is turned on, then go out when the engine is started. If the oil pressure warning light stays on while the engine is running, there is a serious malfunction.

If this happens, stop the car as soon as it is safe to do so, turn off the engine and check the oil level. If the oil level is low, fill the engine oil to the proper level and start the engine again. If the light stays on with the engine running, turn the engine off immediately. In any instance where the oil light stays on when the engine is running, we recommend that the system be checked by an authorized Kia dealer.

Tire Pressure Monitoring System (TPMS) indicator
Low tire pressure telltale/ TPMS malfunction indicator The low tire pressure telltale comes on for 3 seconds after the ignition switch is turned to the ON position. The low tire pressure and ...

Engine oil level warning light
The engine oil level warning light illuminates when the engine oil level should be checked. If the warning light comes on, check the engine oil level as soon as possible and add engine oil ...

Other information:

Kia Cee'd JD Service Manual: PTC Heater (Diesel Engine) Repair procedures
Inspection Operating Logic Test (Manual only) Inspect the PTC operation with the confirmation logic below : 1. Entering (1) Set the Floor mode and maximum heating position. (2) ...

Kia Cee'd JD Service Manual: Brake Pedal Components and components location
Components [LHD]   1. Cowl bracket 2. Brake pedal member assembly 3. Stop lamp switch 4. Return spring 5. Brake pedal 6. Bolt Components [RHD]   1. Cowl bracket 2. Brake pedal member assembly ...

© 2017-2024 www.kceed.com