Inspection |
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the roof trim assembly.
(Refer to Body - "Roof Trim Assembly")
|
3. |
Remove the hands free mic (A) after disconnecting the connector and
loosening 3 screws.
|
4. |
Check the continuity of Mic between terminals.
|
Kia Cee'd JD Owners Manual: Non-operating condition
The sensors are located inside of the
rear bumper.
Always keep the rear bumper clean for
the system to work properly.
WARNING
The warning light on the outside
rearview mirror will illuminate
whenever a vehicle is detected at
the rear side by the system.
To avoid accidents, do ...
Kia Cee'd JD Service Manual: Description and operation
Description
BSD is a system that uses two magnetic wave radar sensors attached on the rear
panel to measure the distance from the following vehicles and provides the sensing
and (visual and auditory) alarm of any vehicle coming into the blind spot.
–
...