Kia Cee'd: Front Seat Belt / Height Adjust Repair procedures

Replacement
[5Door, Waggon only]
1.
Remove the front seat belt upper anchor.
(Refer to Front Seat Belt - "Front Seat Belt Pretensioner")
2.
After loosening the mounting bolts, then remove the height adjustor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
  
Replace any damaged clips.
Height Adjust Components and components location
Component Location [5Door, Waggon only]   1. Height adjust ...

Front Seat Belt Buckle Components and components location
Component Location   1. Front seat belt buckle ...

Other information:

Kia Cee'd JD Service Manual: Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symptom is detected, perform necessary remedy and inspection. &nb ...

Kia Cee'd JD Service Manual: Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within ...

© 2017-2025 www.kceed.com