Removal |
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Disconnect the head lamp height sensor connector.
|
3. |
Remove the assist arm (A).
|
4. |
Remove the head lamp auto leveling unit assembly (B) after mounting
2 nuts.
[Front]
[Rear]
|
Installation |
1. |
Install the head lamp auto leveling unit assembly.
|
2. |
Reconnect the head lamp height sensor connector.
|
3. |
Connect the negative (-) battery terminal.
|
Kia Cee'd JD Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of TPS 1 and 2 at C.T.
and W.O.T.
Specification: Refe ...
Kia Cee'd JD Service Manual: Injector Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the injector connector.
3.
Measure resistance between the injector terminals 1 and 2.
4.
Check that the resistance i ...