Kia Cee'd: Dual Clutch Transmission Control System / Inhibitor Switch Specifications
| Specification |
|
Item |
Specifications |
|
Output type |
Combined signal output |
|
Input voltage (V) |
12 |
Inhibitor Switch Description and operation
Description
The inhibitor switch is mounted on the transmission case. It includes the electric
switch plate circuit and is directly connected with the transmission lever via
tran ...
Inhibitor Switch Schematic diagrams
Schematic Diagrams
...
Other information:
: Programming a MyKey. Clearing All MyKeys. Checking MyKey System Status.
Using MyKey With Remote Start Systems
Programming a MyKey
You can program any remote control to
become a restricted MyKey, but you must
leave one unmodified as an admin key.
Switch the ignition on using an admin
key.
Press Settings on the touchscreen.
Press Vehicle Settings.
Press MyKey.
Select a setting and press the OK
but ...
Kia Cee'd JD Service Manual: Rear Stabilizer Bar Repair procedures
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and tire (A) from rear hub.
Tightening torque:
88.2 ~ 1 ...
