Kia Cee'd: Lighting System / Puddle Lamp Repair procedures

Kia Cee'd JD Service Manual / Body Electrical System / Lighting System / Puddle Lamp Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

Remove the mirror (A) from the mirror holder.

Be careful not to be damage the fixing clip (A).

3.	Disconnect the heating connectors (A) and BSD indicator connector (B) from the mirror.

Disengage the fixing clip and remove the door mirror cover (A).

Take care not to damage the mirror cover fixing clip.

5.	Remove the screw.

6.	Remove the door mirror under cover (A) and then remove the screws (B).

7.	Remove the screws from mirror moving module.

Disconnect the connector (A) and disengage the puddle lamp (B).

Take care not to damage the puddle lamp clip (A)

Installation

1.	Install the puddle lamp and connector.

2.	Install the mirror moving module.

3.	Install the door mirror under cover.

4.	Install the door mirror cover and mirror.

5.	Connect the negative (-) battery terminal and check the puddle lamp operation.

Turn Signal Lamp Repair procedures

Removal Door Mirror Turn Signal Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror (A) from the mirror holde ...

Luggage Room Lamp Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the luggage lamp (A). ...

Other information:

Kia Cee'd JD Owners Manual: Owner maintenance schedule
When you stop for fuel: Check the engine oil level. Check coolant level in coolant reservoir. Check the windshield washer fluid level. Look for low or under-inflated tires. Check the radiator and condenser. Check if the front of the radiator and condenser are clean and not block ...

Kia Cee'd JD Service Manual: Description and operation
Description Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are pre-pro grammed in the memory of the ECM (Engine Control Module). The engine operating conditi ...