Kia Cee'd: Rear Door / Rear Door Belt Inside Weatherstrip Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Belt Inside Weatherstrip Repair procedures

Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Remove the rear door belt inside weatherstrip (A).

3.
Install in the reverse order of removal.
  
Replace any damaged clips.
Rear Door Belt Outside Weatherstrip Repair procedures
Replacement 1. Pull down rear door window glass by pressing the power window glass switch. 2. After loosening the mounting screws, ...

Rear Door Side Weatherstrip Repair procedures
Replacement 1. Detach the clips, then remove the rear door side weatherstrip (A). 2. Install in the reverse order of removal. ...

Other information:

Kia Cee'd JD Owners Manual: Hazard warning flasher
The hazard warning flasher should be used whenever you find it necessary to stop the vehicle in a hazardous location. When you must make such an emergency stop, always pull off the road as far as possible. The hazard warning lights are turned on by pushing in the hazard switch. Both ...

Kia Cee'd JD Service Manual: Receiver-Drier Repair procedures
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with a L wrench (A). Tightening torque : 9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) ...

© 2017-2025 www.kceed.com