Replacement |
1. |
Remove the cap (B) and remove the nuts, then remove the wiper arm (A).
|
2. |
Disconnect the nozzle hose (B).
|
3. |
Detach the clips, then remove the cowl top cover (A).
|
4. |
Install in the reverse order of removal.
|
Kia Cee'd JD Service Manual: Troubleshooting
Troubleshooting
Problem Symptoms Table
Use the table below to help you find the cause of the problem. The numbers indicate
the priority of the like cause of the problem. Check each part in order.
If necessary, replace these parts.
Symptom ...
Kia Cee'd JD Service Manual: Auto Light Sensor Repair procedures
Inspection
In the state of IGN1 ON, when multifunction switch module detects auto light
switch on, tail lamp relay output and head lamp low relay output are controlled
according to auto light sensor's input.
The auto light control doesn't work if the pin sunlight s ...