| Removal |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad center lower panel.
(Refer to Body - "Crash Pad Center Panel")
|
| 3. |
Remove the center facia switch assembly (A) after loosening screws.
|
| Installation |
| 1. |
Install the center facia switch assembly.
|
| 2. |
Install the crash pad center lower panel.
|
| 3. |
Connect the battery (-) terminal.
|
Seat Heater Switch Schematic diagrams
Seat Heater Components and components locationKia Cee'd JD Owners Manual: 2. Select parking assist mode
Select the parking assist mode by pressing
the Smart Parking Assist System
button with the shift lever in N (Neutral)
or D(Drive) and the brake pedal
depressed. If the speed of the vehicle
has not exceeded 5km/h with the IGN in
ON, move the shift lever to N(Neutral) to
sele ...
Kia Cee'd JD Service Manual: Auto Light Sensor Repair procedures
Inspection
In the state of IGN1 ON, when multifunction switch module detects auto light
switch on, tail lamp relay output and head lamp low relay output are controlled
according to auto light sensor's input.
The auto light control doesn't work if the pin sunlight s ...