Specifications |
Transaxle model |
M6CF1 |
||
Engine type |
Gasoline 1.6 MPI |
Gasoline 1.6 GDI |
|
Manual transalxe oil |
Quantity |
1.6 ~ 1.7 ℓ (0.42 ~ 0.45 U.S.gal., 1.69 ~ 1.80 U.S.qt., 1.41 ~ 1.50 lmp qt.) |
1.6 ~ 1.7 ℓ (0.42 ~ 0.45 U.S.gal., 1.69 ~ 1.80 U.S.qt., 1.41 ~ 1.50 lmp qt.) |
Recommended |
- SAE 70W, API GL-4 • The list of transaxle oil approved by KIA: SK HK MTF 70W, SHELL SPIRAX S6 GHME 70W, GS CALTEX GS MTF HD 70W |
- SAE 70W, API GL-4 • The list of transaxle oil approved by KIA: SK HK MTF 70W, SHELL SPIRAX S6 GHME 70W, GS CALTEX GS MTF HD 70W |
|
Gear ratio |
1st |
3.615 |
3.615 / *3.769 |
2nd |
1.955 |
1.955 / * 2.045 |
|
3rd |
1.370 |
1.370 |
|
4th |
1.036 |
1.036 |
|
5th |
0.893 |
0.839 |
|
6th |
0.774 |
0.727 / *0.688 |
|
Reverse |
3.700 |
3.700 |
|
Final gear ratio |
4.267 |
4.267 / *4.059 |
Items |
N.m |
kgf.m |
lb ~ ft |
Oil drain plug |
58.9 ~ 78.5 |
6.0 ~ 8.0 |
43.4 ~ 57.8 |
Oil filler plug |
58.9 ~ 78.5 |
6.0 ~ 8.0 |
43.4 ~ 57.8 |
Shift lever assembly mounting bolt |
8.8 ~ 13.7 |
0.9 ~ 1.4 |
6.5 ~ 10.1 |
Control cable retainer mounting nut |
11.8 ~ 14.7 |
1.2 ~ 1.5 |
8.7 ~ 10.8 |
Back up lamp switch |
39.2 ~ 58.8 |
4.0 ~ 6.0 |
28.9 ~ 43.4 |
Control shaft assembly mounting bolt |
19.6 ~ 26.5 |
2.0 ~ 2.7 |
14.5 ~ 19.5 |
Control cable bracket mounting bolt |
14.7 ~ 21.6 |
1.5 ~ 2.2 |
10.8 ~ 15.9 |
Transaxle support bracket mounting bolt |
58.9 ~ 78.5 |
6.0 ~ 8.0 |
43.4 ~ 57.8 |
Transaxle mounting bracket bolt |
88.3 ~ 107.9 |
9.0 ~ 11.0 |
65.1 ~ 79.6 |
Roll rod bracket mounting bolt |
49.0 ~ 63.7 |
5.0 ~ 6.5 |
36.2 ~ 47.0 |
107.9 ~ 127.5 |
11.0 ~ 13.0 |
79.6 ~ 94.1 |
|
Starter mounting bolt |
49.0 ~ 63.7 |
5.0 ~ 6.5 |
36.2 ~ 47.0 |
Transaxle upper mounting bolt (TM=>ENG) |
42.2 ~ 53.9 |
4.3 ~ 5.5 |
31.1 ~ 39.8 |
Transaxle lower mounting bolt (ENG=>TM) |
42.2 ~ 48.1 |
4.3 ~ 4.9 |
31.1 ~ 35.4 |
42.2 ~ 53.9 |
4.3 ~ 5.5 |
31.1 ~ 39.8 |
Item |
Specified sealant |
Control shaft complete |
Anaerobic adhesives for flange |
Kia Cee'd JD Service Manual: Components and components location
Components (1)
[5Door]
1. Front pillar trim
2. Cowl side trim [LH]
3. Cowl side trim [RH]
4. Center pillar upper trim
5. Center pillar lower trim
6. Rear wheel house trim
7. Rear pillar trim
8. Front door scuff trim
9 ...
Kia Cee'd JD Service Manual: Blower Resistor (Manual) Repair procedures
Inspection
1.
Measure the resistance between the terminals.
2.
If the measured resistance is not within specification, the blower resistor
must be replaced. (After removing the resistor.)
Replacement
...