Kia Cee'd: Tire Pressure Monitoring System (TPMS) / Tire Pressure Monitoring System (TPMS) malfunction indicator

Kia Cee'd JD Owners Manual / What to do in an emergency / Tire Pressure Monitoring System (TPMS) / Tire Pressure Monitoring System (TPMS) malfunction indicator

The TPMS malfunction indicator will illuminate after it blinks for approximately one minute when there is a problem with the Tire Pressure Monitoring System. If the system is able to correctly detect an under inflation warning at the same time as system failure then the TPMS malfunction indicator remains illuminated after blinking for approximately 1 minute.

We recommend that the system be checked by an authorized Kia dealer to determine the cause of the problem.

CAUTION

Low tire pressure telltale, Low tire pressure position telltale
Low tire pressure telltale: Low tire pressure position telltale: When the tire pressure monitoring system warning indicators are illuminated, one or more of your tires is significantly ...

Changing a tire with TPMS
If you have a flat tire, the low Tire Pressure and Position telltales will come on. We recommend that the system be checked by an authorized Kia dealer. CAUTION We recommend that you use the ...

Other information:

Kia Cee'd JD Owners Manual: High - beam operation
1. Turn the light switch to the headlight position. 2. Push the lever away from you. The high-beam indicator will light when the headlight high beams are switched on. To prevent the battery from being discharged, do not leave the lights on for a prolonged time while the engine ...

Kia Cee'd JD Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. Specification: Refe ...

© 2017-2026 www.kceed.com