Kia Cee'd: Tires and wheels / Tire replacement

If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1.6 mm (1/16 in.) of tread left on the tire. Replace the tire when this happens.

Do not wait for the band to appear across the entire tread before replacing the tire.

CAUTION

When replacing the tires, recheck and tighten the wheel nuts after driving about 1,000 km (620miles). If the steering wheel shakes or the vehicle vibrates while driving, the tire is out of balance. Align the tire balance. If the problem is not solved, we recommend that you contact an authorized kia dealer.

✽ NOTICE

We recommend that when replacing tires, use the same originally supplied with the vehicles.

If not, that affects driving performance.

WARNING - Replacing tires

Compact spare tire replacement

A compact spare tire has a shorter tread life than a regular size tire. Replace it when you can see the tread wear indicator bars on the tire. The replacement compact spare tire should be the same size and design tire as the one provided with your new vehicle and should be mounted on the same compact spare tire wheel. The compact spare tire is not designed to be mounted on a regular size wheel, and the compact spare tire wheel is not designed for mounting a regular size tire.

Wheel alignment and tire balance
The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. In most cases, you will not need to have your whe ...

Wheel replacement
When replacing the metal wheels for any reason, make sure the new wheels are equivalent to the original factory units in diameter, rim width and offset. WARNING A wheel that is not the corre ...

Other information:

Kia Cee'd JD Service Manual: TPMS Receiver Schematic diagrams
Circuit Diagram Hamess Connector   Pin No. Discription 1 Battery ECU 2 Ignition ON 3 CAN_HIGH 4 CAN_LOW ...

Kia Cee'd JD Owners Manual: System Setting
Memory Information Press the key Select [System] Select [Memory Information] This feature displays information related to system memory. (1) Using : Displays capacity currently in use (2) Capacity : Displays total capacity Voice Recognition Mode Setting Press the key Select [System ...

© 2017-2024 www.kceed.com