Kia Cee'd: Intake And Exhaust System / Variable Intake Solenoid(VIS) Actuator Repair procedures

Kia Cee'd JD Service Manual / Engine Mechanical System / Intake And Exhaust System / Variable Intake Solenoid(VIS) Actuator Repair procedures

Removal and Installation

1.	Disconnect the battery nagative terminal.

2.	Disconnect the lever (A) and hose (B).

3.	Loosen the mounting bolts and then remove the VIS actuator (C).

4.	Install in the reverse order of removal.

Air Cleaner Repair procedures

Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal. 3. Remo ...

Intake Manifold Components and components location

Components 1. Intake manifold assembly 2. Intake manifold gasket 3. Electronic throttle body gasket 4. Electronic throttle body 5. Bracket ...

Other information:

Kia Cee'd JD Owners Manual: Inner panel fuse replacement
1. Turn the ignition switch and all other switches off. 2. Open the fuse panel cover. 3. Pull the suspected fuse straight out. Use the removal tool provided in the engine compartment fuse panel. 4. Check the removed fuse; replace it if it is blown. 5. Push in a new fuse of the same r ...

Kia Cee'd JD Service Manual: Front Wheel Speed Sensor Repair procedures
Removal 1. Remove the front wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the front wheel speed sensor mounting bolt (A). ...