Kia Cee'd: Why didn’t my air bag go off in a
collision? (Inflation and non-inflation
conditions of the air bag) / Air bag collision sensors

(1) SRS control module
(2) Front impact sensor
(3) Side impact sensor
WARNING
- Do not hit or allow any objects to
impact the locations where air bag
or sensors are installed.
This may cause unexpected air
bag deployment, which could
result in serious personal injury
or death.
- If the installation location or
angle of the sensors is altered in
any way, the air bags may deploy
when they should not or they may
not deploy when they should,
causing severe injury or death.
Therefore, do not try to perform
maintenance on or around the air
bag sensors.We recommend that
the system be serviced by an
authorized Kia dealer.
- Problems may arise if the sensor
installation angles are changed
due to the deformation of the
front bumper, body or B pillar and
C pillars where side collision sensors
are installed.We recommend
that the system be serviced by an
authorized Kia dealer.
- Your vehicle has been designed
to absorb impact and deploy the
air bag(s) in certain collisions.
Installing bumper guards or
replacing a bumper with non-genuine
parts may adversely affect
your vehicles collision and air
bag deployment performance.
There are many types of accidents in
which the air bag would not be expected
to provide additional protection.
These include rear impacts, second or
third collisions in multiple impact
accide ...
Front air bags
Front air bags are designed to inflate in a
frontal collision depending on the intensity,
speed or angles of impact of the front
collision.
Side impact and curtain air bags
...
Other information:
: Evasive Steering Assist
(If Equipped)
What Is Evasive Steering Assist
If your vehicle is rapidly approaching a road
user, evasive steering assist helps you steer
around the road user.
After you turn the steering wheel in an
attempt to avoid a crash with the road
user, the system applies additional steering
torque to h ...
Kia Cee'd JD Service Manual: Starter Specifications
Specification
Starter [Non-ISG type]
Item
Specification
Rated voltage
12 V, 1.2 kW
The number of pinion teeth
10
Performance
[No-load, 11 V]
Ampere
...