Kia Cee'd: Parking brake - Hand type / Applying the parking brake
To engage the parking brake, first apply the foot brake and then without pressing the release button in, pull the parking brake lever up as far as possible. In addition it is recommended that when parking the vehicle on a gradient, the shift lever should be positioned in the appropriate low gear for manual transaxle vehicles or in the P (Park) position for automatic transaxle vehicles.
CAUTION
- Driving with the parking brake applied will cause excessive brake pad (or lining) and brake rotor wear.
- Do not operate the parking brake while the vehicle is moving except in an emergency situation. It could damage the vehicle system and make endanger driving safety.
Releasing the parking brake
To release the parking brake, first apply
the foot brake and pull up the parking
brake lever slightly. Secondly press the
release button (1) and lower the parking
brake lever (2) while press ...
Other information:
Kia Cee'd JD Service Manual: IMS Control Switch Repair procedures
Inspection
1.
Remove the IMS control switch connector (A).
2.
With the IMS control switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the I ...
Kia Cee'd JD Owners Manual: Shift lock system
For your safety, the Dual clutch transmission
has a shift lock system which prevents
shifting the transaxle from P (Park)
or N (Neutral) into R (Reverse) unless
the brake pedal is depressed.
To shift the transaxle from P (Park) or N
(Neutral) into R (Reverse):
1. Depress and hold the bra ...
