Kia Cee'd: Electric parking brake (EPB) / Applying the parking brake

To apply the EPB (electric parking brake):

Pull up the EPB switch. Make sure the warning light comes on.

✽ NOTICE

On a steep incline or when pulling a trailer if the vehicle does not stand still, do as follows:

1. Apply the EPB.

2. Pull up the EPB switch for more than 3 seconds.

CAUTION

Do not operate the parking brake while the vehicle is moving except in an emergency situation. It could damage the vehicle system and endanger driving safety.

Electric parking brake (EPB)
...

Releasing the parking brake
To release the EPB (electric parking brake), press the EPB switch in the following condition: Have the ignition switch or engine start/stop button in the ON position. Depress the brake ...

Other information:

Kia Cee'd JD Service Manual: ESP Control Module Repair procedures
Removal [LHD] 1. Turn the ignition switch OFF. 2. Pull up the lock of the HECU connector (A) , then disconnect the connector. 3. Remove the brake fluid from the master cylinder reservoir with a ...

Kia Cee'd JD Service Manual: Engine Coolant Temperature Sensor (ECTS) Specifications
Specification   Temperature Resistance (kΩ) °C °F -40 -40 48.14 -20 -4 14.13 ~ 16.83 0 32 5.79 ...

© 2017-2025 www.kceed.com