Kia Cee'd: Trip computer / Average speed (km/h or MPH)
This mode calculates the average speed of the vehicle since the last average speed reset.
Even if the vehicle is not in motion, the average speed keeps going while the engine is running.
Pressing the 
button for more
than 1
second, when the average speed is displayed,
clears the average speed to zero
(---).
Instant fuel economy (L/100 km or MPG)
This mode calculates the instant fuel consumption
during the last few seconds.
✽ NOTICE
If the vehicle is not on level ground or
the battery power has been interrupted,
the “Distanc ...
Elapsed time
This mode indicates the total time traveled
since the last driving time reset.
Even if the vehicle is not in motion, the
driving time keeps going while the engine
is running.
The meter’s w ...
Other information:
Kia Cee'd JD Service Manual: Rail Pressure Sensor (RPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
Condition
Output Voltage (V)
...
Kia Cee'd JD Service Manual: Side Impact Sensor (SIS) Repair procedures
Removal
Side Impact Sensor
1.
Disconnect the battery negative cable and wait for at least three minutes
before beginning work.
2.
Remove the door scuff trim.
(Refer to Body - "Door scuff trim")
...
