Kia Cee'd: Luggage rail system (wagon) / Build in segmentation bar

Kia Cee'd JD Owners Manual / Features of your vehicle / Interior features / Luggage rail system (wagon) / Build in segmentation bar

Put both pillars (A) from the segmentation bar in the openings from the rail.
To move the segmentation bar, put your hand on the side of the pillar and push down the lever arm (B).
Make sure the pillars click into place.
To release the belt, turn the upper element (C) to the left or right until it clicks.
Now you can pull the belt (D) and secure your luggage by putting the belt around the luggage and put the hook (E) into the middle of the segmentation bar (F).
For bulky luggage, you can hook both hooks into each other.
To make sure the belt locks, put the upper element (C) back into the lock position (1).

CAUTION

The segmentation bar must be mounted and demounted with both pillars simultaneously.
Max. load: 30 kg with one belt 40 kg with two belts

Luggage rail system (wagon)

The luggage rail system may prevent the luggage from sliding around in the luggage compartment. ...

Applying the shackle on the guide rail

Put the shackle (A) in the position where the shackle is put in the rail. To move the shackle, press the button (1) and move the shackle along the rail. Make sure the shackle is clicked ...

Other information:

Kia Cee'd JD Owners Manual: Lane departure warning system (LDWS)
This system detects the lane with the sensor at the front windshield and warns you when your vehicle leaves the lane. WARNING The LDWS does not make the vehicle change lanes. It is the driver's responsibility to always check the road conditions. Do not turn the steering whe ...

Kia Cee'd JD Owners Manual: Hazard warning flasher
The hazard warning flasher should be used whenever you find it necessary to stop the vehicle in a hazardous location. When you must make such an emergency stop, always pull off the road as far as possible. The hazard warning lights are turned on by pushing in the hazard switch. Both ...