Kia Cee'd: Crash Pad / Center Fascia Panel Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Put on gloves to protect your hands.

•	Take care not to scratch the body surface.

1.	Using a screwdriver or remover, remove the center fascia panel (A).

2.	Disconnect the start/stop button connector (A).

Install in the reverse order of removal.

•	Make sure the connector are connected in properly.

•	Replace any damaged clips.

Component Location 1. Center fascia panel ...

Component Location 1. Crash pad lower panel ...

Kia Cee'd JD Service Manual: Troubleshooting
Troubleshooting • The battery must be in good condition and fully charged for this troubleshooting. ...

Kia Cee'd JD Service Manual: ETC (Electronic Throttle Control) System Troubleshooting
Fail-Safe Mode Item Fail-Safe ETC Motor Throttle valve stuck at 7° TPS TPS 1 fault ECM looks at TPS2 TPS 2 fault ECM looks at TPS1 TP ...