Inspect your spark plugs as described in chapter 7 and replace them if necessary. Also check all ignition wiring and components to be sure they are not cracked, worn or damaged in any way.
Change to "winter weight" oil if
necessary
To keep locks from freezingKia Cee'd JD Service Manual: Description and operation
Description
BSD is a system that uses two magnetic wave radar sensors attached on the rear
panel to measure the distance from the following vehicles and provides the sensing
and (visual and auditory) alarm of any vehicle coming into the blind spot.
–
...
Kia Cee'd JD Service Manual: Mode Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode control actuator operates to the defog mode when
connecting 12V to terminal 3 and ...