Kia Cee'd: ESP(Electronic Stability Program) System / ESP OFF Switch Description and operation

Kia Cee'd JD Service Manual / Brake System / ESP(Electronic Stability Program) System / ESP OFF Switch Description and operation

Description

•	1st stage The ESP engine control function will stop when the ESP OFF indicator on the cluster turns on by pressing the ESP OFF button for 0.15 second. (The brake control function works normally.)

•	2nd stage The ESP engine and brake control function will stop when the ESP OFF indicator on the cluster turns on by pressing the ESP OFF button for 3 seconds.

Yaw-rate and Lateral G Sensor Repair procedures

Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Pull the passenger seat towards the front till ...

ESP OFF Switch Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad center lower panel. (Refer to Crash Pad - &quo ...

Other information:

Kia Cee'd JD Owners Manual: Fuse switch
Always, put the fuse switch at the ON position. If you move the switch to the OFF position, some items such as audio and digital clock must be reset and transmitter (or smart key) may not work properly. When the fuse switch is in the OFF position, a message "Turn on fuse switch" will ...

Kia Cee'd JD Owners Manual: Immobilizer indicator
Without smart key system This indicator illuminates when the immobilizer key is inserted and turned to the ON position to start the engine. At this time, you can start the engine.The indicator goes out after the engine is running. If this indicator blinks when the ignition switch is in ...