Kia Cee'd: Cylinder Block / External Damper Flywheel Repair procedures

Kia Cee'd JD Service Manual / Engine Mechanical System / Cylinder Block / External Damper Flywheel Repair procedures

Removal and installation
1.
Remove the dual clutch transmission.
(Refer to Dual Clutch Transmisson(DCT) - "Dual Clutch Transmisson Assembly")
2.
Remove the external damper (A).
Tightening torque :
71.5 ~ 75.5N.m (7.3 ~ 7.7kgf.m, 52.8 ~ 55.6 lb-ft)

3.
Install in the reverse order of removal.
External Damper Flywheel Components and components location
Components   1. External damper flywheel ...

Water Jacket Insert Components and components location
Components   1. Water Jacket Insert ...

Other information:

Kia Cee'd JD Service Manual: ETC (Electronic Throttle Control) System Troubleshooting
Fail-Safe Mode   Item Fail-Safe ETC Motor Throttle valve stuck at 7° TPS TPS 1 fault ECM looks at TPS2 TPS 2 fault ECM looks at TPS1 TP ...

Kia Cee'd JD Owners Manual: Taking care of leather seats
Vacuum the seat periodically to remove dust and sand on the seat. It will prevent abrasion or damage of the leather and maintain its quality. Wipe the natural leather seat cover often with dry or soft cloth. Sufficient use of a leather protective may prevent abrasion of the cov ...

© 2017-2025 www.kceed.com