Kia Cee'd: Front Door / Front Door Trim Repair procedures

Replacement
  
Put on gloves to protect your hands.
  
Be careful not to scratch the door trim and other parts.
1.
Using a screwdriver or remover, remove the front door grip handle cover (A).

2.
Using a screwdriver or remover, remove the front door inside handle housing (A) and front door pull handle cap (B).

3.
After loosening the mounting screws, then remove the front door trim (A).

4.
Disconnect the front door inside handle cable (A).

5.
Disconnect the IMS switch connector (A) and power window switch connector (B).

6.
Install in the reverse order of removal.
  
Make sure the connector is connected properly.
Make sure the door locks/unlocks and opens/closes properly.
Replace any damaged clips.
Front Door Trim Components and components location
Component Location   1. Front door trim ...

Front Door Inside Handle Repair procedures
Replacement 1. Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2. After loosening the mounting ...

Other information:

Kia Cee'd JD Service Manual: Rail Pressure Sensor (RPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed.   Condition Output Voltage (V) ...

Kia Cee'd JD Service Manual: Repair procedures
Replacement 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the front wheels can face straight ahead. 3. Remove t ...

© 2017-2024 www.kceed.com