Kia Cee'd: SRSCM / Front Impact Sensor (FIS) Description and operation

Kia Cee'd JD Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Description and operation

Description
The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.
SRS Control Module (SRSCM) Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes befo ...

Front Impact Sensor (FIS) Components and components location
Components ...

Other information:

Kia Cee'd JD Service Manual: Blind Spot Detection Unit" Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper cover. (Refer to Body - "Rear Bumper Cover") 3. Remove the BSD unit (A) after loosening the mounting nu ...

Kia Cee'd JD Service Manual: Repair procedures
Replacement    • Be careful not to damage the fender and body.    • ...

© 2017-2025 www.kceed.com