Kia Cee'd: Body Side Molding / Front Wheel Guard Repair procedures
| • |
When prying with a flat-tip screwdriver, wrap it with protective
tape, and apply protective tape around the related parts, to
prevent damage.
|
| • |
Put on gloves to protect your hands.
|
|
| • |
Take care not to scratch the body surface.
|
|
| 1. |
Remove the front tire.
|
| 2. |
After loosening the mounting clips and screws, then remove the front
wheel guard (A).
|
| 3. |
Install in the reverse order of removal.
| •
|
Replace any damaged clips.
|
|
|
Replacement
•
When prying with a flat-tip screwdriver, wrap it with protective
...
Replacement
•
When prying with a flat-tip screwdriver, wrap it with protective
...
Other information:
Kia Cee'd JD Owners Manual: Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the fuse panel on the right
side in the engine compartment.
4. Remove the nuts shown in the picture
above.
5. Replace the fuse with a new one of the
s ...
Kia Cee'd JD Owners Manual: Emergency tailgate safety release
❈ The actual luggage room in the vehicle may
differ from the illustration.
Your vehicle is equipped with the emergency
tailgate safety release lever located
on the bottom of the tailgate. When
someone is inadvertently locked in the
luggage compartment. The tailgate can
be opened by ...
Rear Spoiler Repair procedures
Rear Wheel Guard Repair procedures