Kia Cee'd: Fuel Delivery System / Fuel Sender Assembly Repair procedures

Removal

1.	Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”)

2.	Disconnect the electric pump & sender wiring connector (A).

3.	Remove the fuel feed tube (A) from the fuel filter after releasing the fixing clip (B).

4.	Remove the plate assembly (C) after removing the cushion pipe fixing hooks (D).

5.	Disconnect the electric pump wiring connector (A) from the pump.

6.	Remove the reservior cup (B) after releasing the fixing hooks (C).

7.	Remove the fuel sender (A) with sliding it downward after releasing the latch (B).

Installation

1.	Installation is reserve of removal.

Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the electric pump & sender ...

Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the electric pump & sender ...

Kia Cee'd JD Service Manual: DC DC Converter Repair procedures
Removal 1. Disconnect the battery negative terminal. 2. Remove the glove box housing. (Refer to Body - "Glove Box Housing") 3. Disconnect the DC/DC converter conector (A). 4 ...

Kia Cee'd JD Service Manual: Manifold Absolute Pressure Sensor (MAPS) Description and operation
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal proportional to the pressure to the ECM. By using this signal, the ECM calcul ...