Kia Cee'd: Fuel Delivery System / Fuel Tank Repair procedures
| Removal |
| 1. |
Release the residual pressure in the fuel line.
(Refer to Fuel Delivery System - "Release Pressure in Fuel Line")
|
| 2. |
Fold the rear seat cushion.
(Refer to Body - "Rear Seat Assembly")
|
| 3. |
Open the service cover (A) after loosening the screws (B).
|
| 4. |
Disconnect the fuel pump connector (A).
|
| 5. |
Disconnect the fuel feed quick-connector (B) and the vapor tube quick-connector
(C).
|
| 6. |
Lift the vehicle and support the fuel tank with a jack (A).
|
| 7. |
Disconnect the fuel filler hose (A), the leveling hose (B) and the ventilation
hose (C).
|
| 8. |
Remove the under cover (A) after remove the mounting nuts (B).
|
| 9. |
Remove the fuel tank mounting bolts (A) and then remove the fuel tank
(B).
|
| Installation |
Installation is reverse of removal.
|
Fuel tank installation bolt:
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
|
Repair procedures
Fuel Pressure Test (Low
pressure system)
1.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - “Release Residual Pressure in F ...
Fuel Pump Repair procedures
Inspection
[Fuel pump]
1.
Turn the ignition switch OFF, and then remove battery (-) cable.
2.
Remove the fuel pump assembly.
...
Other information:
Kia Cee'd JD Service Manual: Coolant Repair procedures
Replacement And Air Bleeding
Never remove the radiator cap when the engine is hot. Serious scalding
could be caused by hot fluid under high pressure escaping from the radiator.
...
Kia Cee'd JD Service Manual: Steering Angle Sensor Description and operation
Description
The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering)
and it sends messages to HECU through CAN communication line.
The SAS is used to determine turning direction and speed of the steering wheel.
The HECU uses the signals from th ...
© 2017-2025 www.kceed.com
