Kia Cee'd: Dual Clutch Transmission Control System / Gear Actuator Motor Description and operation

The gear actuator motor is mounted on the complete shaft.

The gear actuator motor comprises the shift motor and select motor.

The gear actuator shift motor and select motor receive signals from the Transmission Control Module (TCM) to control the gear.

Clutch Actuator Motor 2 (Even Gear) Repair procedures

Inspection 1. Turn off the ignition switch. 2. Disconnect the clutch motor connector (A). 3. Meas ...

Gear Actuator Motor Specifications

Specification Gear Actuator Motor ▷ Specifications   Item Specifications Operating condition (°C) °F (20)68 ...

Other information:

Kia Cee'd JD Service Manual: Rear Wheel Speed Sensor Repair procedures
Removal 1. Remove the rear wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the rear wheel speed sensor mounting bolt (A). ...

Kia Cee'd JD Owners Manual: Non-operating condition
The sensors are located inside of the rear bumper. Always keep the rear bumper clean for the system to work properly. WARNING The warning light on the outside rearview mirror will illuminate whenever a vehicle is detected at the rear side by the system. To avoid accidents, do ...