Kia Cee'd: Brake system / Hill-start assist control (HAC)
A vehicle has the tendency to slip back on a steep hill when it starts to go after stopping. The Hill-start Assist Control (HAC) prevents the vehicle from slipping back by operating the brakes automatically for about 1~2 seconds. The brakes are released when the accelerator pedal is depressed or after about 1~2 seconds.
WARNING
The HAC is activated only for about 1~2 seconds, so when the vehicle is starting off always depress the accelerator pedal.
✽ NOTICE
- The HAC does not operate when the transaxle shift lever is in the P (Park) or N (Neutral) position.
- The HAC activates even though the ESC is off but it does not activate when the ESC has malfunctioned.
Malfunction indicator
The VSM can be deactivated even if you
don’t cancel the VSM operation by pressing
the ESC OFF button. It indicates that
a malfunction has been detected somewhere
in the EPS (Electronic Power ...
Emergency Stop Signal (ESS)
The Emergency Stop Signal system
alerts the driver behind by blinking the
stop light when the vehicle is braked rapidly
and severely.
The system is activated when:
The vehicle suddenly stop ...
Other information:
Kia Cee'd JD Service Manual: Power Window Motor Repair procedures
Inspection
Front Power Window Motor Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Disconnect the connector from the motor.
3.
Connect the m ...
: Adjusting the Seatbelt Height
WARNING: Position the seatbelt
height adjuster so that the seatbelt rests
across the middle of your shoulder.
Failure to adjust the seatbelt correctly
could reduce its effectiveness and
increase the risk of injury in a crash.
Press the button and slide the height
adjuster up or down.
Rele ...
