Kia Cee'd: Hood / Hood Latch Release Handle Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle Repair procedures

Replacement
1.
Using a screwdriver or remover, remove the hood latch release handle (A).

2.
Install in the reverse order of removal.
  
Make sure the hood latch cable is connected properly.
Make sure the hood locks/unlocks and opens/closes properly.
Hood Latch Release Handle Components and components location
Component Location   1. Hood latch release handle ...

Hood Latch Components and components location
Component Location   1. Hood latch assembly ...

Other information:

Kia Cee'd JD Service Manual: Muffler Repair procedures
Removal and Installation [Front muffler] 1. Disconnect the rear oxygen sensor connector (A). 2. Remove the front muffler (A). Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ...

Kia Cee'd JD Service Manual: Special service tools
Special Service Tools   Tool(Number and Name) Illustration Use 09495-3K000 Band installer Installation of ear type boot band 09495-33000 Puller ...

© 2017-2024 www.kceed.com