Kia Cee'd: Dual Clutch Transmission Control System / Input Speed Sensor 1 Schematic diagrams

Input Speed Sensor 1 Specifications

Specification Input Speed Sensor 1 ▷ Type: Hall effect sensor ▷ Specifications   Item Specifications Output voltage (V) ...

Input Speed Sensor 1 Repair procedures

Inspection Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor. Removal 1. Turn off the ignition switch and then disconnect the batte ...

Other information:

Kia Cee'd JD Service Manual: ISG (Idle Stop & Go) Description and operation
Description Idle Stop & Go (ISG) system switches off the ignition when vehicle is stopped, and then restarts the ignition and starts the vehicle when accelerator is pushed. It temporarily stops the engine while waiting for signal or idling to improve fuel efficiency and ...

Kia Cee'd JD Owners Manual: Owner maintenance schedule
When you stop for fuel: Check the engine oil level. Check coolant level in coolant reservoir. Check the windshield washer fluid level. Look for low or under-inflated tires. Check the radiator and condenser. Check if the front of the radiator and condenser are clean and not block ...