Kia Cee'd: Dual Clutch Transmission Control System / Input Speed Sensor 2 Description and operation

The input shaft speed sensor is important in that it detects the input shaft RPM and sends this information to the Transmission Control Module (TCM).

It provides important input information for electric control.

The information is needed in all operations, including feedback control, gear shift control and failure detection of other sensors.

Input Speed Sensor 1 Repair procedures

Inspection Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor. Removal 1. Turn off the ignition switch and then disconnect the batte ...

Input Speed Sensor 2 Specifications

Specification Input Speed Sensor 2 ▷ Type: Hall effect sensor ▷ Specifications   Item Specifications Output voltage (V) ...

Other information:

Kia Cee'd JD Owners Manual: Static bending light
While driving the corner, for your sight and safety, the static bending light turns on automatically. The system will operate automatically as follows: When vehicle speed is under 10km/h and steering wheel angle approximately 80 degrees. When vehicle speed is over 10km/h and ste ...

Kia Cee'd JD Service Manual: Audio Remote Control Repair procedures
Inspection Type A 1. Check the audio remote control switch (A) for resistance between terminals in each switch position. [Audio]   Switch Connector terminal Res ...