Kia Cee'd: Dual Clutch Transmission Control System / Input Speed Sensor 2 Specifications
Kia Cee'd JD Service Manual / Dual Clutch Transmission(DCT) System / Dual Clutch Transmission Control System / Input Speed Sensor 2 Specifications
| Specification |
Input Speed Sensor 2
▷ Type: Hall effect sensor
▷ Specifications
|
Item |
Specifications |
|
|
Output voltage (V) |
Low |
0.7 |
|
High |
1.4 |
|
Input Speed Sensor 2 Description and operation
Description
The input shaft speed sensor is important in that it detects the input shaft
RPM and sends this information to the Transmission Control Module (TCM).
It provides i ...
Input Speed Sensor 2 Schematic diagrams
Schematic Diagrams
...
Other information:
Kia Cee'd JD Service Manual: Back-up Lamp Switch Specifications
Specifications
Item
Specified
Type
ON/OFF
Operation condition
Reverse gear
Operation voltage
10V ~ 15V
Operation temperatures
-30°C ...
Kia Cee'd JD Service Manual: Rear Parking Assist System Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the console upper tray complete.
(Refer to Body - "Floor Console Assembly")
3.
Disconnect the connector (A).
...
© 2017-2026 www.kceed.com
