Kia Cee'd: Front seat / Manual adjustment

Kia Cee'd JD Owners Manual / Safety features of your vehicle / Seat / Front seat / Manual adjustment

Forward and backward

To move the seat forward or backward:

1. Pull the seat slide adjustment lever up and hold it.

2. Slide the seat to the position you desire.

3. Release the lever and make sure the seat is locked in place.

Adjust the seat before driving, and make sure the seat is locked securely by trying to move forward and backward without using the lever. If the seat moves, it is not locked properly.

Seatback angle

Turn the control knob forward or rearward to move the seatback to the desired angle.

Seat cushion height

To change the height of the seat cushion, push the lever upwards or downwards.

To lower the seat cushion, push down the lever several times.
To raise the seat cushion, pull up the lever several times.

Lumbar support

The lumbar support can be adjusted by pressing the lumbar support switch on the side of the seat.

1. Press the front portion of the switch to increase support, or the rear portion of the switch, to decrease support.

2. Release the switch once it reaches the desired position.

Automatic adjustment

The driver’s seat can be adjusted by using the control switches located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so as to easily control the ...

Other information:

Kia Cee'd JD Owners Manual: Heating and air conditioning
1. Start the engine. 2. Set the mode to the desired position. To improve the effectiveness of heating and cooling: - Heating: - Cooling: 3. Set the temperature control to the desired position. 4. Set the air intake control to the outside (fresh) air or recirculated position. 5. Set ...

Kia Cee'd JD Owners Manual: Speed limiter indicator
The indicator illuminates when the speed limit control system is enabled by move the lever up on the steering wheel. The indicator goes off when the lever up again to deactivate the system. If there is a problem with the speed limit control system, the “---” indicator will blin ...