| Removal |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the mirror (A) from the mirror holder.
|
| 3. |
Disconnect the heating connectors (A) and BSD indicator connector (B)
from the mirror.
|
| 4. |
Disengage the fixing clip and remove the door mirror cover (A).
|
| 5. |
Remove the screw.
|
| 6. |
Remove the door mirror under cover (A) and then remove the screws (B).
|
| 7. |
Remove the screws from mirror moving module.
|
| 8. |
Disconnect the connector (A) and disengage the puddle lamp (B).
|
| Installation |
| 1. |
Install the puddle lamp and connector.
|
| 2. |
Install the mirror moving module.
|
| 3. |
Install the door mirror under cover.
|
| 4. |
Install the door mirror cover and mirror.
|
| 5. |
Connect the negative (-) battery terminal and check the puddle lamp
operation.
|
Turn Signal Lamp Repair procedures
Luggage Room Lamp Repair proceduresKia Cee'd JD Owners Manual: Air bag warning light
This warning light will illuminate for
approximately 6 seconds each time you
turn the ignition switch to the ON position.
This light also comes on when the SRS
is not working properly. If the air bag
warning light does not come on, or continuously
remains on after operating for
about ...
Kia Cee'd JD Service Manual: Crankshaft Position Sensor (CKPS) Repair procedures
Inspection
1.
Check signal waveform of CKPS and CMPS using a GDS.
Specification: Refer to “Waveform”
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative ...