Kia Cee'd: Emergency starting / Push-starting
Your manual transaxle-equipped vehicle should not be push-started because it might damage the emission control system. Vehicles equipped with automatic transaxle cannot be push-started. Follow the directions in this chapter for “Jumpstarting”.
WARNING
Never tow a vehicle to start it because the sudden surge forward when the engine starts could cause a collision with the tow vehicle.
Jump starting
Jump starting can be dangerous if done
incorrectly. Therefore, to avoid harm to
yourself or damage to your vehicle or
battery, follow the jump starting procedures.
If in doubt, we strongly rec ...
If the engine overheats
If your temperature gauge indicates overheating,
you will experience a loss of
power, or hear loud pinging or knocking,
the engine is probably too hot. If this happens,
you should:
1. Pull of ...
Other information:
Kia Cee'd JD Service Manual: Description and operation
Function Of Safety Power
Window
When driver door power window auto-up switch is operated, safety function is
activated.
1.
Safety function condition
When detect the force of 100N (using the 10N/mm spring) during the window
rising, window is ...
Kia Cee'd JD Service Manual: Accelerator Position Sensor (APS) Description and operation
Description
Accelerator Position Sensor (APS) is installed on the accelerator pedal module
and detects the rotation angle of the accelerator pedal. The APS is one of the
most important sensors in engine control system, so it consists of the two sensors
which adapt individual ...
