Kia Cee'd: Rear Seat / Rear Seat Assembly Repair procedures

Replacement

After loosening the mounting bolts and then push it up and remove the rear seat cushion assembly (A).

Tightening torque :

16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)

[5Door, Waggon]

[3Door]

Loosen the rear center seat belt buckle (A) mounting bolt.

Tightening torque :

39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.	Remove the rear seat back center hinge bracket cover (A).

Loosen the rear seat back mounting bolt (A).

Tightening torque :

16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)

5.	Pull out the rear seat center mounting bracket (A).

6.	Remove the rear seat back assembly (B).

7.	Install in the reverse order of removal.

Component Location 1. Rear seat cushion assembly 2. Rear seat back assembly ...

Component Location 1. Rear seat back cover [LH] 2. Rear seat back cover [RH] ...

Kia Cee'd JD Service Manual: Cylinder Head Repair procedures
Removal Engine removal is not required for this procedure. • Use fender covers to avoid damaging painted surfaces. • To avoid dam ...

Kia Cee'd JD Service Manual: Engine Control Module (ECM) Schematic diagrams
ECM (Engine Control Module) ECM Harness Connector ECM Terminal Function Connector [C200-A] Pin No. Description Connected to 1 Injector (Cylinder #3) [High] control output ...