Kia Cee'd: Trip computer / Service mode

This mode calculates when you need a scheduled maintenance service (mileage or days)

If you want to see the service mode when other modes are displayed, press the button less than 1 second.

If you do not have your vehicle serviced according to the scheduled maintenance service on the LCD display, this LCD display will show the elapsed mileage or days.

If you want to reset the maintenance schedule, when the service required message is displayed :

- Press the button more than 5 seconds. - " : Reset" will be shown on the LCD display. - Press the button again more than 1 second.

If you do not press the button within 5 seconds, " : Reset" will disappear.

If you want to change the interval of the maintenance service schedule, we recommend that you consult an authorized Kia dealer.

✽ NOTICE

If service mode is not activated, the LCD display shows, like the above picture.

In this case, we recommend that you consult an authorized Kia dealer.

Lane Departure Warning System (LDWS) Mode
This mode displays the state of the Lane Departure Warning System (LDWS). For more details, refer to “Lane departure warning system” in chapter 5. ...

User Settings
1. Stop the vehicle with the ignition switch in the ON position or engine running. 2. Press the button until the User setting mode is displayed. 3.You can change the item by pressing th ...

Other information:

Kia Cee'd JD Service Manual: Fuel Pump Repair procedures
Inspection [Fuel pump] 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel pump assembly. 3. Check motor operation by fuel pump connector (A) connecting power (No. ...

Kia Cee'd JD Service Manual: Clutch Pedal Components and components location
Components   1. Master cylinder 2. Ignition lock switch 3. Clutch switch 4. Pedal pad ...

© 2017-2024 www.kceed.com