| Removal |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad center fascia panel.
(Refer to Body - "Center Fascia Panel")
|
| 3. |
Disconnect the start/stop button connector (A).
|
| 4. |
Remove the start/stop button (A) after loosening the screws.
|
| Installation |
| 1. |
Install the start/stop button.
|
| 2. |
Connect the start/stop button connector.
|
| 3. |
Install the crash pad center garnish.
|
Start/Stop Button Components and components locationKia Cee'd JD Service Manual: General safety information and caution
Precautions
General Precautions
Please read the following precautions carefully before performing the airbag
system service.
Observe the instructions described in this manual, or the airbags could accidentally
deploy and cause damage or injuries.
• ...
Kia Cee'd JD Service Manual: ABS Control Module Repair procedures
Removal [LHD]
1.
Turn the ignition switch OFF.
2.
Pull up the lock of the HECU connector (A), and then disconnect the
connector.
3.
Remove the brake fluid from the master cylinder reservoir wi ...