Kia Cee'd: Specifications & Consumer information / Tire specification and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance for normal driving.
The tire label located on the driver's side center pillar gives the tire pressures recommended for your vehicle.
Vehicle certification label
The vehicle certification label attached
on the driver’s (or front passenger’s) side
center pillar gives the vehicle identification
number (VIN). ...
Engine number
■ Gasoline engine (Kappa)
■ Gasoline engine (Gamma)
■ Diesel engine
The engine number is stamped on the
engine block as shown in the drawing. ...
Other information:
Kia Cee'd JD Service Manual: Description and operation
Description
This specification applies to HCU(Hydraulic Control Unit) and ECU(Electronic
Control Unit) of the HECU.(Hydraulic and Electronic Control Unit)
This specification is for the wiring design and installation of ABS ECU.
This unit has the functions as follows.
...
Kia Cee'd JD Service Manual: Rear Wheel Speed Sensor Repair procedures
Removal
1.
Remove the rear wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the rear wheel speed sensor mounting bolt (A).
...
