Kia Cee'd: Cruise Control system / To set cruise control speed
1. Move the lever down (
) on the
steering wheel, to turn the system on.
The cruise indicator light will illuminate.
2. Accelerate to the desired speed, which must be more than 30 km/h (20 mph).
✽ NOTICE - Manual transaxle
For manual transaxle vehicles, you should depress the brake pedal at least once to set the cruise control after starting the engine.
3. Move the lever down (to SET-), and release it at the desired speed. The cruise set indicator light will illuminate. Release the accelerator pedal at the same time. The desired speed will automatically be maintained.
On a steep grade, the vehicle may slow down or speed up slightly while going downhill.
Cruise control switch
O: Cancels cruise control operation.
: Turns cruise control system on
or
off.
RES+: Resumes or increases cruise
control speed.
SET-: Sets or decreases cruise control
speed. ...
To increase cruise control set
speed
Follow either of these procedures:
Move the lever up (to RES+) and hold
it.Your vehicle will accelerate. Release
the lever at the speed you want.
Move the lever up (to RES+) and
relea ...
Other information:
Kia Cee'd JD Owners Manual: Good braking practices
WARNING
Whenever you leave or park your
vehicle, always set the parking
brake as far as possible and fully
engage the vehicle's transaxle
into the P (Park) position. If the
parking brake is not fully
engaged, the vehicle may move
inadvertently and injure yourself
and othe ...
Kia Cee'd JD Service Manual: Inhibitor Switch Repair procedures
Inspection
1.
Inspect for loosened connectors, faulty connections, bends, corrosion,
contamination, deformation, or damage.
2.
Disconnect the inhibitor switch connector.
3.
Check the voltage on the p ...
