Kia Cee'd: Tire Pressure Monitoring System / TPMS Receiver Description and operation
It search automatically sensor location and learn the new sensor.
To check defect of system or vehicle, use the sensor information, distance,
indistinct noise, automatic learning status, vehicle battery condition, and
inner receiver condition.
Item
|
Specifications
|
Dark current
|
Max 0.5mA [ Ign off, Can bus off]
|
Connector quantity
|
6 pin [Can msg use warning lights]
|
MCU
|
UPD78F1829 [NEC, 192k, 48pin]
|
RF Receiver
|
TDA5236 [Infineon, -3dbm better, 3*3 size]
|
EEPROM
|
MCU with built-in memory
|
Function
|
Delete "Parking Supervision" function
[Detection function of the pressure changes when stopping -deletion, dark
current reduction]
|
Mode
| 1. |
Initial state
| • |
The receiver is a single component parts, replaced parts must
be initial state.
|
| • |
Platform information and ID sensor is not entered.
|
|
| 2. |
Normal operation states
| • |
To detect the tire pressure or DTC, the receiver must be in
normal operating condition.
|
| • |
Verify the location of sensor and information through receiver.
|
|
| 1. |
Normal operation
| • |
Once process is finished successfully, the ID of four sensors
or wheel location is entered to the memory device.
|
| • |
If there is pressure loss and air leakage until ending the automatic
learning, detect the previous learned sensor ID.
|
| • |
Does not appear spare tire inflation and DTC status.
|
|
| 2. |
General condition for learning new sensor.
| • |
The receiver automatically finds out the location of four sensors.
|
| • |
The receiver should receive the sensor that is not temporary.
|
|
Removal
1.
Remove the valve core and deflate the tire.
2.
Remove the side of the tire bead area from the wheel using tire changing
...
Circuit Diagram
Hamess Connector
Pin No.
Discription
1
Battery ECU
2
Igni ...
Other information:
: Master Access Code
What Is the Master Access Code
The master access code is a factory-set
five-digit entry code. You can operate the
keypad with the master access code at
any time. The master access code is on the
owner’s wallet card in the glove box and
is available from an authorized dealer.
Displaying the Ma ...
Kia Cee'd JD Service Manual: Engine Coolant Temperature Sensor (ECTS) Description and operation
Description
Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant passage
of the cylinder head for detecting the engine coolant temperature. The ECTS
uses a thermistor that changes resistance with the temperature.
The electrical resistance of the ECTS d ...
TPMS Sensor Repair procedures
TPMS Receiver Schematic diagrams