Kia Cee'd: Restraint / Airbag Module

PAB ON/OFF Switch Repair procedures

Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes bef ...

Driver Airbag (DAB) Module and Clock Spring Description and operation

Description Driver Airbag (DAB) is installed in the steering wheel and electrically connected to SRSCM via the clock spring. It protects the driver by deploying the airbag when f ...

Other information:

Kia Cee'd JD Service Manual: Rear Door Latch Repair procedures
Replacement 1. Remove the rear door module. (Refer to Rear Door - "Rear Door Module") 2. Remove the rear door outside handle base (A) by pushing in the lock pins located in the back. 3. ...

Kia Cee'd JD Service Manual: ISG (Idle Stop & Go) Description and operation
Description Idle Stop & Go (ISG) system switches off the ignition when vehicle is stopped, and then restarts the ignition and starts the vehicle when accelerator is pushed. It temporarily stops the engine while waiting for signal or idling to improve fuel efficiency and ...