Kia Cee'd: Restraint
Kia Cee'd JD Service Manual / Restraint
- General information
- Specifications
- Special service tools
- General safety information and caution
- Description and operation
- Repair procedures
- Components and components location
- SRSCM
- SRS Control Module (SRSCM) Description and operation
- SRS Control Module (SRSCM) Components and components location
- SRS Control Module (SRSCM) Repair procedures
- Front Impact Sensor (FIS) Description and operation
- Front Impact Sensor (FIS) Components and components location
- Front Impact Sensor (FIS) Repair procedures
- Side Impact Sensor (SIS) Description and operation
- Side Impact Sensor (SIS) Components and components location
- Side Impact Sensor (SIS) Repair procedures
- PAB ON/OFF Switch Description and operation
- PAB ON/OFF Switch Components and components location
- PAB ON/OFF Switch Repair procedures
- Airbag Module
- Driver Airbag (DAB) Module and Clock Spring Description and operation
- Driver Airbag (DAB) Module and Clock Spring Components and components location
- Driver Airbag (DAB) Module and Clock Spring Repair procedures
- Passenger Airbag (PAB) Module Description and operation
- Passenger Airbag (PAB) Module Components and components location
- Passenger Airbag (PAB) Module Repair procedures
- Side Airbag (SAB) Module Description and operation
- Side Airbag (SAB) Module Components and components location
- Side Airbag (SAB) Module Repair procedures
- Curtain Airbag (CAB) Module Description and operation
- Curtain Airbag (CAB) Module Components and components location
- Curtain Airbag (CAB) Module Repair procedures
- Airbag Module Disposal Description and operation
- Seat Belt Pretensioner (BPT)
Steering Gear box Repair procedures
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front w ...
General information
General
The supplemental restraint system (SRS) is designed to supplement the seat belt
to help reduce the risk or severity of injury to the driver and passenger by
activating an ...
Other information:
Kia Cee'd JD Service Manual: Accelerator Position Sensor (APS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
Specificati ...
Kia Cee'd JD Owners Manual: Turn signals and lane change signals
The ignition switch must be on for the
turn signals to function. To turn on the
turn signals, move the lever up or down
(A). Green arrow indicators on the instrument
panel indicate which turn signal is
operating.
They will self-cancel after a turn is completed.
If the indicator contin ...
© 2017-2026 www.kceed.com
