Kia Cee'd: Light bulbs / License plate light bulb replacement
1. Turn off the engine.
2. Remove the bulb assembly by pressing the tabs.
3. Remove the socket by turning it counterclockwise.
4. Remove the bulb by pulling it straight out.
5. Install a new bulb.
6. Reinstall the bulb assembly securely with the retaining screws.
High mounted stop light bulb
replacement
If the light does not operate, we recommend
that the system be checked by an
authorized Kia dealer. ...
Other information:
Kia Cee'd JD Owners Manual: Checking the brake/clutch fluid
level
■ Type A
■ Type B
Check the fluid level in the reservoir periodically.
The fluid level should be
between MAX and MIN marks on the
side of the reservoir.
Before removing the reservoir cap and
adding brake/clutch fluid, clean the area
around the reservoir cap thoroughly to
preve ...
Kia Cee'd JD Service Manual: Rear Washer Switch Repair procedures
Inspection
Check for continuity between the terminals while operating the wiper and washer
switch. If it is not normal condition, replace wiper and wiper switch.
Rear Wiper Switch
Rear Washer Switch
...
