Kia Cee'd: Lubrication System / Oil Pan Repair procedures
| 1. |
Remove the under covers.
|
| 3. |
Using the SST(09215-3C000) and remove the oil pan.
| •
|
Insert the SST between the oil pan and the ladder frame
by tapping it with a plastic hammer in the direction
of ① arrow.
|
| •
|
After tapping the SST with a plastic hammer along the
direction of ② arrow around more than 2/3 edge of the
oil pan, remove it from the ladder frame.
|
| •
|
Do not turn over the SST abruptly without tapping. It
be result in damage of the SST.
|
|
|
| 1. |
Install the oil pan.
| (1) |
Using a razor blade and gasket scraper, remove all the old packing
material from the gasket surfaces.
|
Check that the mating surfaces are clean and dry before
applying liquid gasket.
|
|
| (2) |
Apply liquid gasket as an even bead, centered between the edges
of the mating surface.
|
Liquid gasket : TB 1217H or LOCTITE 5900H
|
|
• |
To prevent leakage of oil, apply liquid gasket
to the inner threads of the bolt holes.
|
|
• |
Do not install the parts if five minutes or
more have elapsed since applying the liquid
gasket.
Instead, reapply liquid gasket after removing
the residue.
|
|
• |
After assembly, wait at least 30 minutes before
filling the engine with oil.
|
|
|
| (3) |
Install the oil pan (A) with the bolts.
Uniformly tighten the bolts in several passes.
|
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
|
|
|
| 2. |
Refill the engine oil.
|
Capacity
Total : 4.0L (4.22 U.S.qt., 3.51 lmp.qt., 1.05 U.S.gal.)
Oil pan : 3.3L (3.48 U.S.qt., 2.90 lmp.qt., 0.87 U.S.gal.)
Drain and refill in cluding oil filter :
3.6L (3.80 U.S.qt., 3.16 lmp.qt., 0.95 U.S.gal.)
|
|
| 3. |
Installation is in the reverse order of removal.
|
Components
1. Gasket
2. Oil screen
3. Oil pan
4. Drain plug gasket
5. Drain plug
...
Removal and Installation
1.
Remove the oil lever gauge(A).
Tightening torque:
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
...
Other information:
Kia Cee'd JD Service Manual: Temperature Control Actuator Description and operation
Description
The heater unit includes mode control actuator and temperature control actuator.
The temperature control actuator is located at the heater unit. It regulates
the temperature by the procedure as follows. Signal from the control unit adjusts
the position of the ...
Kia Cee'd JD Service Manual: Description and operation
Cruise Control
The cruise control system is engaged by the cruise "ON/OFF" main switch located
on right of steering wheel column. The system has the capability to cruise,
coast, accelerate and resume speed.
It also has a safety interrupt, engaged upon depressing ...
Oil Pan Components and components location
Oil Level Gauge & Pipe Repair procedures